Benefits
- Standard adapter for the flexographic industry
- High durability and stability
- Several air supply alternatives available to meet press-specific requirements
- Available as Bridge, Unifit or Airo versions for customised air transfer system
Air source
How the air flows into the adapter
Bridge:
For wall thicknesses below 10 mm. Conducts air from the air cylinder to the surface via air holes.
Unifit:
Customised air transfer system for most types of air cylinders. In the Eco Bridge version, the air holes are replaced by a breathable metal ring on the operator side.
Airo:
Dedicated external air connection system. In the Eco Bridge version, the air holes are replaced by a breathable metal ring on the operator side.
Air Distribution
How the air flows out of the adapter, in order to mount the sleeve
Standard Air Holes
4-8 air holes on operator side, additional holes along the length of the adapter
Eco Bridge – breathable metal ring
Breathable metal ring along the entire circumference of the adapter on the operator side. Eco Bridge can be used with an Airo or Unifit Air Source and no additional air holes are typically needed along the length of the adapter.
- Up to 90% less compressed air needed for easy sleeve mounting
- 99% reduction in noise
- Increased efficiency for cost savings and improved productivity
